Compression and flexure testing presses

High-performance compression and flexure testing presses with double testing chamber with two load cells and independent ranges of 250 KN and 15 KN.

D075.

Automatic testing machine with double independent testing area and double piston for 300 KN and 15 KN of capacity for compressive – flexural strength of standardized specimens of cements, mortars of 40x40x160 mm. EN 196-1, UNE 80101 governed by a state-of-the-art computer with a high performance microprocessor module, displaying the process graph during the test. Manufactured with high quality components for compression/flexure tests on 4x4x16 cm. specimens or other tests, as long as it does not exceed the machine’s capacity. Through the use of compression/flexion devices. It has two high-precision load cells.

MODULE MEASUREMENT AND CONTROL SYSTEM (Automatic)

The control module is a microprocessor-controlled electronic equipment that performs the servo control of the closed-loop testing machine in digital form, managed by an external personal computer. The high working speed of the equipment allows a very precise control of the testing machine actuator and its digital filtering allows maintaining a high resolution and stability in the indications of the reading variables.

The electronic module performs several fundamental functions:

• Receives the maneuver orders entered from the computer.
• Establishes communication with the computer to communicate press status in real time

All the necessary control and visualization is done through a personal computer running the interface program under Windows.

CHARACTERISTICS:

• Load cells: 300 and 15 KN
• Spacing between plates: 310 mm.
• Plate diameter: 165 mm.
• Accuracy: ±0.1
• Dimensions: 1800x500x700 mm approx. (not including computer table)
• Power supply: 380 VAC III + N + T
• Weight: 400 Kg approx.

It is supplied with a state-of-the-art computer with flat screen, computer table, protection screen for the test area, software CD with general test program and instruction manual in English.

The bending-compression devices must be ordered separately.